Tag Archives: shield

Lowrance HDI Transducer Shields in Stock Now

hdi skimmerIf you plan to mount your new Lowrance HDI Skimmer transducer that came with your Elite unit on your trolling motor you should consider adding a transducer shield for this setup. On the new HDI transducer there is a plastic bracket that slides onto the transducer which is then attached to the mounting hardware.  This plastic bracket can be a weak link, should you accidentally hit an underwater obstruction.

The best way to avoid damaging the mount ($40 to replace) or even the transducer ($130 to replace) is to protect it with a Transducer Shield and Saver TSHDI2.  This is by far the best option out there to protect the larger HDI transducer.  These and many other Transducer Shield and Saver products are in stock at Radioworld.

Transducer Sheild SaverTransducer Sheild Saver2

 

March Madness Sale Starts Today!!

Starting today at Radioworld we are storming into March with our “March Madness Sale”.

2013-march-madness-sale

There will be a taxes in sale on all of the following…

All Minn Kota products
All Talons
All Power-Pole products
All Transducer Shield and Saver products
All Durasafe
All RAM Mounts
All RMC Boatworks Mounts and Trolling Motor Stabilizers
All Raptor products
All Glomex products
All Lowrance accessories
All Simrad accessories
All Humminbird accessories

We also have the Hydrowave Freshwater models on for $410 taxes in!  The FishHawk X-4 is at $599 taxes in and the FishHawk X-4D is $750 taxes in!

low-elite-7-hdi_mNow if that isn’t enough we are going to have select models from manufacturers on sale like the Lowrance Elite7 HDI Gold for $750, the Humminbird 598 ci HD SI for $840 plus a $100 mail in rebate.  All Navionics charts will be $25 off when purchased with a Humminbird, Lowrance, or Simrad chartplotter.

Much of our remaining Ice Fishing stock from Humminbird and Vexilar is on sale and all MarCum products are so low we can’t even advertise the prices!!  Email, call, or visit the store for MarCum pricing.  Aqua-Vu Micro AV Plus camera’s are on for $355!  The full size Aqua-vu underwater cameras are also part of this sale.

If you are looking for a Garmin Handheld GPS or a Nuvi for the car, we have many selected models on sale right now!

hum-998csi_m

There are many more sales available in store and online.  Sales will end on March 24th 2013 and some restrictions may apply.

Also, don’t forget about our current clearout promotions on Lowrance HDS Base units and Humminbird 998c SI which we are getting close to sold out on!

-Lawren

 

 

 

 

Transducer Shield and Saver Installation

Radioworld Pro Staff Danny Dunn had his Lowrance Structure Scan transducer mounted on the side of his jack plate with the standard mount supplied by Lowrance.  After about a month of fishing his rusted bolt and twisted bracket needed a face lift to ensure his side imaging sonar was performing properly.

Danny’s boat has a 8″ Slidemaster jack plate which makes a perfect mounting surface for the Transducer Shield and Saver mount.  The best part of all is that you don’t have to do any drilling into your boat.  These mounts will use the factory holes on most jackplates.  Let’s take a look at how he mounted his Lowrance LSS-2 10″ transducer with Transducer Shield and Saver.  Notice the before and after pictures…what a difference!

Transducer Shield and Saver has mounting solutions for transom mount and trolling motor mount transducer.  These mounts not only secure your transducer, but they also prevent it from being damaged in case of an unexpected impact.

-Lawren